Today is
 
DongGuan HuaRui hamPu Group Co,.Ltd;Shore Hardness Tester-A
     User login
User name:
Password:
Register  Forget password?
       Prouduct list
Thermometer
Thickness Regulation
Shore Hardness Tester
Caliper
E-scale series
Contact thermometer
Coating Thickness Gauge Series
Microscope Series
Anemometer
Light Meter
Magnifier
Metal Hardness Tester
Ultrasonic Distance
Glossmeter
Colorimeter
Push Pull Meter
Formaldehyde detector
Sound Level Meter
Hygrometer
Product Moisture Instrument
U.S. Pantone PANTONE Color Card
Gas Detector
Leather softness Detector
Laser Level
Ultrasonic Thickness Gauge
Leather softness Detector
Leather softness Detector
Surface static tester
 

Product Show  
 Shore Hardness Tester >> Shore Hardness Tester-A
 
    
Number:
9099.09909909909E+16
Name:
Shore Hardness Tester-A
Spec:
A-
Memo:
Applies to: rubber, silicone, rubber ring hardness of soft products.
Class:
Shore Hardness Tester
Inquire:
华瑞汉普网站客服  
 
     Product Readme

First, an overview of
Rubber • Rubber • Plastics Plastics hardness is a reflection of overall performance, while the Shore hardness is a measure of
Rubber • Plastic hardness of a more sophisticated measurement tools. The product uses "ISO 868
-1986 Plastics and ebonite - Determination of pressure with Shore hardness tester hardness "•" ISO 7619 Rubber
Rubber with a Shore hardness determination of indentation hardness "international standards to organize production and testing. Products
According to application requirements are divided into desktop and portable hardness tester hardness tester two types.
Second, the structure forms • Category
Press hardness tester pressure needle shape can be divided into A-• D-type and O-three kinds.
              Hardness model • parameter table (mm)
Measuring their ability to model the overall shape of the pressure measuring head length dial needle scale
A 8.1N 1Kg cone voltage pin top angle of 35 ° 2.5 0-100
D 44.5N 5Kg end of the sharp 30 ° 2.5 0-100
O 8.1N 1Kg spherical radius of 2.38 2.5 0-100
Third, the use of instructions
Test sample thickness is greater than 6mm, not enough thickness to the same material base set, but not more than
3-layer. Test area can not be less than the pressure foot (ф18mm) edge.
1. Desktop hardness measurements: first hardness pull up, then put into the specimen, and then hardness tester
   Slowly down to measure the average of the three pilot sample hardness value.
2. Portable hardness tester measurements: hardness by hand grasp, so that sufficient pressure equilibrium with the sample pressed (so
   Pressure in the table below), a second reading the instructions, when the table in order to measure the average of three points
   The hardness of the specimen.

Note: Routine use of choice of A-type or D type, when the A-hardness value is greater than 90 ° when you recommend the use of D-type or
           Select other models. After use should be properly kept.


Hits:475  UpdateTime:2009-09-29 【Print】 【Close
FriendLinks
  Products | Feedback  | Contact us | Favorites|sitemap  
Copyright 1999-2012 Huarui hanpu group
www.hrhp99.com
Company Address:The First floor of fifth building CITIC ambitious new world.Two,hongtu road,South City,Dongguan, Guangdong Province
Hotline :0769-22855805 89977508 89977506 Fax :0769-22855904 E-mail:huashu168@126.com
 

统计: